Edges aren't going to proper alignment

Show us what you're working on and we'll provide words of encouragement and constructive criticism to achieve the best results possible.
Post Reply
Designer
Posts: 7
Joined: Fri Aug 03, 2018 8:10 pm

Edges aren't going to proper alignment

Post by Designer » Thu Nov 15, 2018 6:01 pm

Hi,
I am making a simple corset.
I added the boning on top but it does not go all the way to the edge.
I have the pressure set to 2 but there is very little puff.
One side is Md the other side is Daz Studio.
The other image is the pattern.
Any advice is appreciated.

Also, I am interested in the purchasing the new MD update. When using the trace uv's does it come in
with the sewing already applied?

Cheerio
Designer

Image
Image-01.jpg
Image-01.jpg (102.83 KiB) Viewed 605 times

User avatar
LoriGriffiths
Posts: 390
Joined: Mon Jun 08, 2015 4:39 pm

Re: Edges aren't going to proper alignment

Post by LoriGriffiths » Wed Dec 05, 2018 4:00 pm

The new Pattern from UV Map does come in sewn, although MD can make some odd choices in regard to the vertices created and the sewing. If you want to see all the new features of 8 in action, you can sign up for my Udemy course (note, it is not free).https://www.udemy.com/marvelous-designe ... 8-updates/

As for your corset, you have lots of different things going on here so it is difficult to say what the problem is. I'm not sure why you are using Pressure on this. If you want patterns to be thicker, you might try the Thickness option of the Fabric applied.

Post Reply